PRODUCTION INFORMATION
Production Description
Qtech-413 Urban Metro Vibration & Noise Reduction Damping Material is independently developed by Qingdao Shamu International Trade Co., Ltd. The viscoelastic material system consists of A component, a quasi-prepolymer rich of free NCO, and B component, a mixture of polyetheramines, hydroxyl-terminated polyether, amine extenders and other additives. Qtech-413 can convert mechanical energy into heat energy by the coactions of resin and energy dissipation filler. It is used by itself or in combination with other materials to produce damping protective coatings, anti collision liners, reinforcing layer, and resilient surface on urban metro, tunnel concrete. Qtech-413 can produce an extremely tough film at all thicknesses; it may be applied in all positions and to any suitably prepared substrate. Qtech-413 can effectively decrease the vibration, noise and impact of high speed train; it can improve the safety and durability of urban metro.
Advantages
1. Excellent vibration & noise reduction, impact resistant.
2. Bondable and paintable to various kinds of substrates.
3. Fast cure, short down time, no sagging.
4. Excellent Waterproofing and Impervious.
5. Ambient insensitive, good thermal stability.
6. 100% Solids, No VOC’s, Odorless, No Toxic Vapors.
7. Good resistance to a wide range of chemical attack.
8. Good weather ability, Added color stability.
9. Wide service temperature (-45~150 ºC).
10. Seamless, flexible, slick and non-porous.
Recommended Uses
Qtech-413 Urban Metro Vibration & Noise Reduction Damping Material is a fast cure system; it can be applied at thicknesses of several ten millimeters, or greater, in a single application. It can be widely used in urban metro vibration and noise reduction; it can also be applied in vehicle, shipping, machinery and high speed railway noise insulation zone and so on.
Physical Properties
Damping loss factor |
≥ 0.05 |
Complex loss factor |
0.15~0.25 |
Tensile Strength/ MPa |
≥8 |
Elongation/% |
≥400 |
Adhesion/% |
100 |
Toxicity |
Non toxic |
Impact strength/( N/m) |
4.0 |
Sea water immersion(6 months) |
No Blister, No Corrosion, No Spalling |
Salt frog(>1000hrs) |
No Blister, No Corrosion, No Spalling |
Diesel Fuel(8 months) |
No Blister, No Corrosion, No Spalling |
|
Product Characteristics
Gel Time/min |
﹤2 |
Shelf Life |
6 months, unopened at 15~40 ºC |
Flash Point/ ºC |
>100 |
Mix Ratio V/V |
1: 1 |
Recommended Spreading Thickness/mm |
2~3 |
Colors |
Optional |
|
Drying time is temperature, humidity, and film thickness dependent.
Chemical Resistance
Consult our technicist and chemical test date for corrosive environment applications.
Installation
Consult our application information and recommended method statements.
Packaging
• Part A: 220kilogram per drums.
• Part B: 200 kilogram per drums.
Custom package available at additional charge.
Notes
1. Qtech product is intended for industrial use by properly trained professional applicators only..
2. Thoroughly mix container of B component with an air-driven power mixer for a minimum of 15 minutes prior to application.
3. Adding a nitrogen blanket is strongly recommended for use on the “A” component for storage after opening.
4. It is a 100% solids production, strictly prohibit add any diluents.
5. The quality and fitness of the product is depending upon the proper mixture and application of the component by the applicator.
6. This specification is an accumulation of long term testing and experience. Published technical data and instructions are subject to change without notice.
Technical Data Sheets
• Qtech-413 Urban Metro Vibration & Noise Reduction Damping Material 
[2011-05-06]
